THSL立式單級雙吸中開泵

提要描寫:
產物分類:中開泵
產物材質:HT250,QT400-18,ZG1Cr18Ni9Ti,ZCuZn16Si4,HT200,2Cr13,3Cr13,45等
產物流量:22~11620m3/h
產物揚程:7.7~183m
保送溫度:+1℃~+80℃
密封情勢:填料密封、機器密封

產物分類: 中開泵

產物材質:HT250,QT400-18,ZG1Cr18Ni9Ti,ZCuZn16Si4,HT200,2Cr13,3Cr13,45等
產物流量:22~11620m3/h
產物揚程:7.7~183m
保送溫度:+1℃~+80℃
密封情勢:填料密封、機器密封


THSL型單級雙吸中開泵概述:


THSL型單級雙吸中開泵是我公司手藝職員在接收外洋進步前輩雙吸泵手藝根本上,鑒戒外洋優異的水力模子,經由過程CFD闡發及布局優化設想而開辟的新產物。該系列產物機能規模廣,運轉安穩,效力高,利用保護便利,用戶操縱簡潔。
THS series single stage double suction horizontal split casing centrifugal pump, new product developed by our own, base on absorption of international and domestic advanced technology, and reference to international good hydraulic mould, and analyze through CFD and optimize of structure by our technical engineer. The features of this series pump are wide performance range, stable operation, high efficiency, convenient using and maintenance, easy operation.
在THS型泵的根本上經由過程轉變材質、密封布局等辦法派生出THSM(耐磨型)、THSF(耐侵蝕型)、THSY(保送油類)型泵,THS、THSM、THSF、THSY系列產物機能參數和外型尺寸分歧,別的在THS型泵的根本上經由過程轉變裝置體例派生出THSL型單級雙吸立式中開泵,全系列水泵可保送介質的溫度為0℃~80℃,合用于工場、電廠、自來水廠,石化、礦山、消防體系、船舶產業、都會給排水、農田澆灌和各類水利工程等,是傳統型單級雙吸中開泵的周全進級換代產物。

By changing material, seal structure and others base on THS series, it comes THSM series (wearable), THSF series (anti-erosion), THSY series (for oil delivering), performance data and overall dimension of THS, THSM, THSF, THSY series are the same, besides, by changing of installation method base on THS series pump, it comes THSL series single stage double suction vertical split casing centrifugal pump, for delivering fluid with temperature between 0~80℃, suitable for factory, power plant, running water plant, petrochemical industry, mining industry, firefight system, shipping industry, municipal water conservancy, farmland irrigation, and other hydraulic projects, etc. This series pump is completely upgrade products base on traditional series single stage double suction split casing centrifugal pump.


THSL型單級雙吸中開泵型號意思:


THS(M、F、Y)L-200-670AF
THSL—天宏泵業通俗型雙吸中開泵
THSM—天宏泵業耐磨型雙吸中開泵
THSF—天宏泵業耐侵蝕型雙吸中開泵
THSY—天宏泵業雙吸中開油泵
L—表現立式裝置,臥式裝置時無此標記
200—表現水泵出口直徑為200mm
670—表現水泵名義直徑為670mm
A—葉輪切割標記
F—從傳動端看,水泵轉子逆時針標的目的扭轉(規范型順時針扭轉無此標記)


THSL型單級雙吸中開泵任務規模:


出口口徑:DN 80~800mm
流量:Q 22~11620m3/h(設想點)
揚程:H 7.7~183m(設想點)
入口口徑:P≤0.2Mpa
任務溫度:+1℃~80℃

THSL型單級雙吸中開泵布局特色:


小型THSL泵(規格:THS80-210至THS350-510,以下同)可臥式裝置或立式裝置,大型THS泵(規格:RHS350-630至THS800-990,以下同)臥式裝置。水泵收支口法蘭可按GB規范、ISO規范、DIN規范、BS規范或ANSI規范設置。
THS型泵首要由泵體、泵蓋、葉輪、軸系部件、聯軸器、部洗水管部件等零部件構成。泵的進、出均在水泵軸心線下方,與軸線垂直呈程度標的目的,且在統一直線上。泵體、泵蓋為程度中開,檢驗時不需裝配管路和機電。
泵體、泵蓋接納對稱雙流道吸入,使入口無漩渦,下降入口喪失。葉輪接納對稱雙吸,實際上軸向力均衡,葉輪除根基型外可改型設想及切割,擴展其利用規模。
軸系部件:軸系部件有兩種差別的布局,一種用于小型THS泵,另外一種用于大型THS泵。小型THS泵的軸系由軸、軸套、密封體、軸承體、軸承壓蓋、軸承等構成。密封體與泵體、泵蓋構成葉輪的任務室。大型THS泵的軸系由軸、軸套、填料套、軸承座、軸承蓋、軸承、鎖緊螺母等構成。
軸完整密封、不打仗介質、不銹蝕、運轉壽命長。
軸封:規范的軸封腔可接納填料密封或機器密封。填料沖刷水或機封沖刷水由“沖刷水管部件”從泵蓋的吐出室引入或從內部接入。
軸承的挑選:
對臥式泵,兩頭接納油脂光滑球軸承,也能夠選用稀油光滑布局。
對立式泵,上端為油脂光滑軸承,下端為接納介質光滑的聚四氟乙烯導軸承或銅導軸承。
扭轉標的目的:從傳動端看,水泵轉子順時針標的目的扭轉(規范型),按照用戶須要,也可出產為逆時針標的目的扭轉,需在定貨時出格申明。